Quick Answer / TL;DR: Dixon lawn mowers were manufactured in Coffeyville, Kansas, USA, by Dixon Industries until Husqvarna acquired the brand in 2000. No new Dixon mowers are produced in 2026 — the brand is discontinued. Used units remain available through eBay, auctions, and classifieds, with parts supported via Husqvarna cross-references.
As a garden equipment technician who has serviced Dixon zero-turns for over 20 years, I’ve traced serial plates, cross-referenced Husqvarna legacy charts, and inspected dozens of used units. Here’s the definitive 2026 guide to Dixon’s manufacturing origin, ownership history, and what it means for buyers today. For comparison, see our guide on where Gravely lawn mowers are made.
What You Need
Before verifying a Dixon mower’s origin or evaluating a used purchase, gather the following:
- Serial decoder chart — For origin verification; free PDF archives of Dixon and Husqvarna legacy charts are available online.
- Multimeter — To test battery, charging system, and wiring harness condition.
- Torque wrench — For deck bolt inspection; most Dixon deck bolts fall in the 30–50 ft-lb range.
- Husqvarna parts cross-reference — Official lookup tool to match spindles, bearings, and other consumables to current part numbers.
- Flashlight and seat pan lift access — The serial plate sits under the seat or on the frame rail.
- Service history records — Request these from any used seller before committing.
New to lawn mower maintenance? Our guide to the EGO Power+ Z6 rear bumper is a good starting point for modern equipment care.
Step-by-Step Guide
Step 1: Confirm the Original Manufacturing Location
Dixon Industries built every ZTR model in Coffeyville, Kansas. The plant handled frame welding, deck fabrication, engine installation, and final testing. There were no offshore plants under the Dixon name during independent production. Serial plates were stamped with U.S. origin codes — look for “Coffeyville” or KS plant marks on the plate under the seat or on the frame rail.
Why it matters: Confirming origin verifies U.S. steel and assembly quality, which affects rust resistance and aftermarket fitment.
Sub-step: Locate the Serial Plate
- Lift the seat pan.
- Read the 8–12 digit code and plant stamp.
- Cross-check against an online Dixon serial decoder or Husqvarna legacy charts.
💡 Pro Tip: Photograph the serial plate immediately when inspecting a used unit. Some plates corrode or become illegible within a season of outdoor storage, and a photo makes parts ordering far easier later.
Step 2: Trace Ownership and the Brand Transfer
Who makes Dixon lawn mowers? Originally Dixon Industries (pre-2000); later Husqvarna. What company bought Dixon lawn mowers? Husqvarna acquired Dixon Industries in 2000. Husqvarna kept the Dixon badge on select zero-turns for several years. Production remained Kansas-linked initially, then folded into broader Husqvarna lines before the brand was phased out entirely.
Are Dixon lawn mowers still made? No. Husqvarna dropped the Dixon name, and no new units leave any factory under Dixon branding in 2026.
Sub-step: Check Corporate Records
- Search Husqvarna annual reports from 2000–2010.
- Note that “Dixon” product-line mentions disappear post-acquisition integration.
- Confirm via archived dealer bulletins.
Step 3: Evaluate Current Availability and Quality
Are Dixon lawn mowers any good? Yes — for heavy residential and light commercial zero-turn work. Rigid frames, strong fabricated decks, and hydrostatic drives held up well under abuse. Owners consistently praise cut quality and maneuverability. After 15+ years of service, the typical weak points are hydro seals, spindle bearings, and wiring harnesses.
Sub-step: Inspect a Used Unit
- Test hydro engage/disengage — listen for slipping or delayed response.
- Measure deck thickness and check for spindle play.
- Demand service history; walk away if the seller can’t provide any.
⚠️ Warning: Never test a hydrostatic drive at full speed on hard pavement. Spin-outs on worn tires with degraded hydro seals can cause sudden loss of control. Test in an open, flat area at low speed first.
Step 4: Locate Purchase Sources in 2026
Where to buy Dixon lawn mowers (used market only):
- Online: eBay, Facebook Marketplace, Craigslist.
- Auctions: Farm equipment sales and estate sales.
- Dealers: Independent shops that still stock Dixon-compatible parts.
⚠️ Warning: Avoid any website claiming to sell “new” Dixon mowers. The brand is discontinued — these listings are scams or mislabeled clones with no OEM support.
Common Mistakes & Troubleshooting
- Assuming all Kansas-stamped units predate Husqvarna. Husqvarna continued Kansas-linked production for a period after the 2000 acquisition. Cross-check the serial number against decoder charts rather than trusting the plant stamp alone to date the machine.
- Ordering parts by model name instead of serial number. Post-acquisition Dixon models share components with Husqvarna lines. Always use the full serial code with the Husqvarna cross-reference tool — model name alone frequently returns the wrong spindle or belt.
- Overlooking hydro seal failure during inspection. A unit that drives fine cold may lose drive when hot. Run the mower for 20–30 minutes, then re-test hydro response before buying. Warm-fluid seal weeping is the #1 expensive surprise on 15+ year old Dixons.
- Ignoring wiring harness degradation. Brittle insulation and corroded connectors cause intermittent safety-switch faults that mimic bad PTO clutches. Test circuits with a multimeter before replacing the clutch — save yourself a $200+ part.
- Buying from “new Dixon” listings. No factory produces Dixon-branded mowers in 2026. Any seller advertising new production is either scamming or selling generic imports under a dead brand name with zero parts support.
Frequently Asked Questions
Where are Dixon lawn mowers made?
Dixon lawn mowers were manufactured in Coffeyville, Kansas, USA, by Dixon Industries. All original production — frame welding, deck fabrication, engine installation, and final testing — took place at the Kansas plant, with serial plates stamped with U.S. origin codes.
Who makes Dixon lawn mowers now?
Nobody. Dixon Industries manufactured the mowers independently until Husqvarna acquired the brand in 2000. Husqvarna produced Dixon-badged zero-turns for several years before discontinuing the name entirely. No new Dixon mowers are made in 2026.
Are Dixon lawn mowers still made?
No. Husqvarna phased out the Dixon brand after the 2000 acquisition. Only used units and NOS (new-old-stock) parts circulate on the secondary market. Any retailer advertising new Dixon production should be treated as a scam risk.
Are Dixon lawn mowers any good?
Yes, for heavy residential and light commercial zero-turn work. Dixon’s rigid frames, fabricated decks, and hydrostatic drives were known for durability, cut quality, and maneuverability. Expect to service hydro seals, spindle bearings, and wiring harnesses on units older than 15 years.
Where can I buy a Dixon lawn mower in 2026?
The used market only: eBay, Facebook Marketplace, Craigslist, farm equipment auctions, and estate sales. Independent dealers who still stock Dixon-compatible parts may also have trade-ins. Avoid listings claiming “new” Dixon mowers — the brand is discontinued.
Can I still get parts for a Dixon mower?
Yes. Use the Husqvarna official parts cross-reference to match Dixon serial numbers to current part numbers for spindles, bearings, belts, and common wear items. Aftermarket suppliers and independent dealers with legacy Dixon inventory cover most other components.
